Safest Premium Synthetic Glossy Enamel

All Kind of Enamel

Color	Weight
White	200 ml,500 ml,1 ltr,4 ltr and 20 ltr.
Shades	200 ml,500 ml,1 ltr,4 ltr and 20 ltr.

Coverage : Area coverage is about 180-200 sq. ft/ ltr/coat.

USP : Safest Premium Synthetic Glossy Enamel imparts a shiny new look. Provides a long lasting washable finish.

Usage Area : Wood , Metal and Wall surfaces.

Clean: Prepare the surface by sanding with Emery Paper 180 to remove loose particals, paint, dust/grease and cracked or flaked paint. wipe clean.
Primer : Apply a 1st coat of primer depending on the surface. For wooden surfaces use SAFEST WOOD PRIMER .For steel surfaces use SAFEST METAL PRIMER by diluting with Enamel Thinner 10-15% by volume for Brushing, 15-20% by volume for Spraying. Apply one coat of Primer by Brushing or Spraying. Allow to dry for 6-8 hours.
Putty : (Optional) Smoothen the surface by filling dents with the SAFEST KNIFING PASTE FILLER with putty knife. Allow to dry for 6-8 hrs. Then sand with emery 180 and wipe clean.
Primer: If SAFEST KNIFING PASTE FILLER has been used ,apply another coat of primer(For wooden surfaces use SAFEST WOOD PRIMER ,For steel surfaces use SAFEST METAL PRIMER). Allow it to dry for 6-8 hours. Sand with Emery Paper 320 wipe clean.
TOP COAT:Thin a litre of Safest Premium Synthetic Glossy Enamel with 80-100 ml of enamel thinner . Apply first coat ,after an interval of 8 hours apply the second coat.

Diluent: Enamel Thinner.
Recommended Surfaces: Wood/metal/wall.
Method of Application: By Brush or Spray.
Dillution ratio: 80ml-100 ml of enamel thinner.
Drying Time: Tack free 3 hrs, Surface Dry -60 minutes, Hard Dry-over night.
Gloss level: 70-80 T 60 deg gloss head,coated in metal tin panel.
Fire Hazard Class: B.
Flash Point: More than 40 Degree C.
Pot Life: Thinned paint to be used before 24 hours. Lid to be kept airtight when not in use.
Density: 0.90 - 1.10.
No. of coats: 2-3.
Safety Data: Refer MSDS.