Distemper
Safest Acrylic Primer
(RED OXIDE METAL PRIMER/ZINC CHROME YELLOW METAL PRIMER)
Availlable in pack sizes
| Color | Weight |
|---|---|
| White | 1 kg,2 kgs,5 kgs,10 kgs and 20 kgs. |
| Bases | 1 kg,2 kgs,5 kgs,10 kgs and 20 kgs. |
Coverage : Area coverage is about 80-90 sq.ft/kg/2 coats.
USP : Acrylic Distemper offers smooth finish ,Good adhesion to the wall with great economy.Anti fungal and anti bacterial.
Usage Area : Interior walls.
Directions for Use:
- Clean: Ensure that the surface to be painted is free from any loose paint,dust,grease,fungus or algae by wire brushing and cleaning with water.
- Smoothen: Smoothen the surface by filling dents and fine cracks with thin coat of SAFEST ACRYLIC WALL PUTTY and allow it drying for 4-6 hours.
- Prime : Apply one coat of SAFEST INTERIOR PRIMER by suitable thinning with potable water and allow it for 4-6 hours.
- Top coat : Apply 2-3 coats by diluting 1 kg of SAFEST ACRYLIC DISTEMPER with a maximum of 750 ml potable water.A gap of 4-6 hours should be given between two coats.
Technical data
- Diluent: Potable Water
- Recommended Surfaces: Sand/Cement plasters,Asbestos,Brick work,concrete block and fibreboard.
- Method of Application: Brush, Roller or Spray.
- Drying Time: Surface Dry -20 minutes,Hard Dry-4 hours.Recoating time – 6 hours.
- Gloss level: Matt Finish.
- Fire Hazard Class: Non Flammable.
- Flash Point: N.A(hence 100% waterbased).
- Pot Life: Best used before 72 hours of diluted paint.Lid to be kept airtight when not in use.
- VOC : 10.5 gm/ltr.
- Density: 1.66 +/-0.02.
- Dilution Ratio: 750 ml water per 1 kg of paint.
- No. of coats: 2-3.
- Safety Data: Refer MSDS.