Safest Wall Care Putty
Safest Wall care putty is a white cement based plaster putty mix providing the filling benefits of plaster as well as the smoothness of a putty.
Interior as well as exterior walls , Surface exposed to the elements where a high performance waterproofing and decorative coating is desirable.
Direction for Use:
- Clean: Plastard surfaces should be matured and properly dried and must be free from grease and oil.Oil and loose flaking material must be removed by scraping or other abrasive methods. Then sand surface with emery paper no 180 and wipe it to remove the dust.
- Prime: Apply one coat of Safest Interior Primer and allow it dry for 6-8 hrs.
- Smoothen: Smoothen the surface by filling dents and fine cracks with thin coat of SAFEST WALL CARE PUTTY diluting 1 kg with 400-500ml of potable water and allow drying for 4-6 hrs.Apply 2-3 coats and sand the dried surfaces with emery paper no.180 wipe it clean.apply another coat of INTERIOR/EXTERIOR PRIMER over the sanded putty and allow it to do dry for 6-8 hours.
Supplied Viscosity at 30’C: 110-120 K.U(Stormar Viscometer)
White: 1, 5, 10, 20 KG
Recommended Diluents: Portable Water
Recommended Surfaces: Sand/Cement plaster, asbestos, brickwork, concrete block and fiberboard.
Method of application: Putty knife or Trowel
Dilution Ratio: No dilution.
NO of coats:2-3
Drying time: Surface dry-30min, Hard dry-4 hrs, Recoating time-8 hrs.
Gloss level: Matt finish.
Flash point : 100% water based hence NA
Fire Hazard Glass: Non Flammable