Safest Texture Paint
Safest Texture Paint made with special acrylic blinder gives a strong and smooth finish to the wall. It is also an economic product.
Exterior walls, surfaces exposed to the weather/rain where a high performance waterproofing and decorative coating is desirable .
Direction for Use:
- Clean: Ensure that the surface to be matured and properly dried and must be free from grease and oil. Oil and loose flaking material must be removed by scraping or other abrasive methods. Then sand surface with emery paper no.180 and wipe it to remove the dust.
- Primer: Apply one coat of Safest Exterior primer and allow it dry for 6-8 hrs. Then apply one coat of Safest Texture Paint diluting with 200ml of potable water inper KG. allow it to dry for 12 hrs. No need of curing. Above this apply primer and then topcoat.
Area: 2-4 sq.ft/ltr/coat.
Supplied Viscosity at 30’C: 110-120 K.U(Stormar Viscometer)
White: 25 and 30 Kilograms.
Recommended Diluents: Portable Water
Recommended Surfaces: Sand/Cement plaster, asbestos, brickwork, concrete block.
Method of application: Putty knife or trowel..
Dilution Ratio: 100ml potable water/Kg of Texture.
NO of coats: Single
Drying time: Surface dry-30min, Hard dry- 6 hrs, Recoating time-12 hrs.
Gloss level: Sandy Finish.
Fire Hazard Glass: Non Flammable
Potlife: 24 hours post dilution. Keep the bag airtight when not in use.