Safest Red Oxide Metal Primer
Recommended for use on structural steel subjected to humidity, condensation and industrials environments in general.
Used in all Metal surfaces.
Direction for Use:
- Cleaning: Sand the surface with emery paper 180 to wipe clean. Ensure through cleaning of corroded areas by suitable means .
- Primer: Apply one ltr safest red oxide metal primer to be diluterd with 80-100ml safest enamel thinner to obtain brushing consistency.
- Putty:(Optional) Smoothen surface by filling dents with thin coats of safest knifing Paste Filler allow to try for 6-8 hours. Sand with emery paper 180 and wipe clean.
- Primer: Safest Knifing filler has been used. Apply a coat of primer to avoid a patchy appearance, allow it to dry for 6-8 hrs. Sand with emery paper 320, before application of the top coat.
Area: 130-150s sq.ft/ltr/2coat.
Supplied Viscosity at 30’C: 110-120 K.U(Stormar Viscometer)
White: 200ml,500ml,1,4,20 ltr
Recommended Diluents: Enamel Thinner
Recommended Surfaces: Metal surface .
Method of application: Brush or spray.
Dilution Ratio: 80-100Ml of enamel thinner /lt
NO of coats:1-2
Drying time: Tack free 3 min, Hard dry over night .
Gloss level: Matt finish
Flash point: 40deg C and above
Potlife: Thinned Paint to be used before 24hrs
Density:1.40+/- 0.02 .