Safest Shine Interior Luxury Emulsion
Soft silky finish. Unmatched stain resistance. Excellent antibacterial and fungal protection. Relatively odor free.
Interior walls, where a high performance, Premium, long wall finish with very good stain resistance is desired.
Direction for Use:
- Clean: Ensure that the surface to be painted is free from any loose paint, dust, grease, fungus or algae by wire brushing and cleaning with water.
- Smoothen: Smoothen the surface by filling dents and fine cracks with thin coat of SAFEST ACRYLIC WALL PUTTY and allow drying for 4-6 hours.
- Primer: Apply 1 coat of Safest Interior primer by thinning 2:1 allow to dry for 4-6 hours and then sand the surface with emery paper 400.
- Top Coat: Apply 2-3 coats by diluting 1Ltr of SAFEST PREMIUM INTERIOR EMULSION with a maximum of 400-500ml of water. A gap 4-6 hrs should be given between 2 coats.
Area: 140-150 sq.ft/ltr/2coat.
Supplied Viscosity at 30’C: 110-120 K.U(Stormar Viscometer)
White: 1, 4, 10, 20 Litres and Bases : 0.9,3.6,9,18 Litres.
Recommended Diluents: Portable Water
Recommended Surfaces: Sand/Cement plaster, asbestos, brickwork, concrete block.
Method of application: Brush, Roller or spray.
Dilution Ratio: 400-500Ml potable water/Ltr of primer.
NO of coats:2-3
Drying time: Surface dry-20min, Hard dry-4 hrs, Recoating time-6 hrs.
Gloss level: Matt finish.
Fire Hazard Glass: Non Flammable
Potlife: Best used before 72 hrs post dilution. Lid to be kept airtight when not in use.
.Density:1.30 +/- 0.02