Safest Ultra Exterior Emulsion
Premium exterior emulsion. Provides a waterproof coating to the surface and also reduces the temperature inside by 3-5 deg C. Also prevents dust pick up thus your walls look fresh and newly painted for years.
Exterior walls, surfaces exposed to the weather/rain where a high performance waterproofing and decorative coating is desirable .
Direction for Use:
- Clean: Ensure that the surface to be painted is free from any loose paint, dust, grease, fungus or algae by wire brushing and cleaning with water.
- Smoothen: Smoothen the surface by filling dents and fine cracks with thin coat of SAFEST ACRYLIC WALL PUTTY and allow drying for 4-6 hours.
- Primer: Apply 1 coat of Safest Interior primer by thinning 2:1 allow to dry for 4-6 hours and then sand the surface with emery paper 400.
- Top Coat: Apply 1st coat SAFEST ULTRA EXTERIOR EMULSION and allow it 3-4 hrs. Apply the 2nd coat and allow the coated surface to fully cure for 8 days. Do NOT dilute the topcoat when applying.
Area: 75-85 sq.ft/ltr/2coat.
Supplied Viscosity at 30’C: 110-120 K.U(Stormar Viscometer)
White: 1, 4, 10, 20 Litres and Bases : 0.9,3.6,9,18 Litres.
Recommended Diluents: Portable Water
Recommended Surfaces: Sand/Cement plaster, asbestos, brickwork, concrete block.
Method of application: Brush, Roller or spray.
Dilution Ratio: 400-500Ml potable water/Ltr of primer.
NO of coats:2-3
Drying time: Surface dry-20min, Hard dry-4 hrs, Recoating time-6 hrs.
Gloss level: Sheen level 12-15@60 deg gloss head on glass panel.
Fire Hazard Glass: Non Flammable
Potlife: Best used before 72 hrs post dilution. Lid to be kept airtight when not in use.
VOC:33.67 gm/ltr and Density:1.26 +/- 0.02