Safest Acrylic Wall Putty
Premium acrylic wall putty is a water based putty that enhanced the durability as well as look of your paints.
Interior walls, Surfaces exposed to the elements where a high performance waterproofing and decorative coating is desirable.
Direction for Use:
- Clean: Plastard surfaces should be matured and properly dried and must be free from grease and oil.Oil and loose flaking material must be removed by scraping or other abrasive methods. Then sand surface with emery paper no 180 and wipe it to remove the dust.
- Prime: Apply one coat of Safest Interior Primer and allow it dry for 6-8 hrs.
- Smoothen: Smoothen the surface by filling dents and fine cracks with thin coat of safest acrylic wall putty and allow drying for 4-6 hours. Sand the dries surfaces with emery paper no 180 wipe it clean. Apply another coat of safest interior primer over the sanded putty and allow it to dry for 6-8 hours. Ensure that the surface to be painted is free from any loose paint, dust, grease, fungus or algae by wire brushing and cleaning with water.
Supplied Viscosity at 30’C: 110-120 K.U(Stormar Viscometer)
White: 1, 5, 10, 20 KG
Recommended Diluents: Portable Water
Recommended Surfaces: Sand/Cement plaster, asbestos, brickwork, concrete block and fiberboard.
Method of application: Putty knife or Trowel
Dilution Ratio: No dilution.
NO of coats:2-3
Drying time: Surface dry-30min, Hard dry-4 hrs, Recoating time-8 hrs.
Gloss level: Matt finish.
Flash point : Non Flammable
Fire Hazard Glass: Non Flammable
Potlife: 24 hrs post dilution. Keep the container air tight when not in use.
Density: 1.70 +/- 0.02